RE14016 Crossed Roller Bearing
The RE14016 is optimized for applications requiring inner ring rotation, making it ideal for high-precision rotary tables, industrial robots, semiconductor manufacturing equipment, and measuring instruments. Its compact cross-section allows for space-saving designs without compromising stiffness or accuracy.
Technical Parameters
| Inner Diameter (d) | 140 mm |
| Outer Diameter (D) | 175 mm |
| Roller Pitch Diameter (Dpw) | 160 mm |
| Width (B) | 16 mm |
| Chamfer (rmin) | 1 |
| Shoulder Size (ds) | 147 |
| Shoulder Size (Dh) | 162 |
| Basic Load Rating (Radial) Cr | 25.9 kN |
| Basic Load Rating (Radial) C0r | 50.1 kN |
| weight | 1 kg |
| Precision Grade | P5 / P4 / P2 (optional) |
Check More Type of RB Crossed Roller Bearing
Shipping Standards and Inspection Process
Before shipment, each RE14016 Crossed Roller Bearing undergoes a 100% dimensional and rotational accuracy inspection to ensure it meets precision and performance standards. All bearings are cleaned, pre-lubricated, and tested for noise and torque before packing. Only products that pass the final quality certification and traceability check are approved for dispatch. Shipments follow ISO-compliant packaging and export standards to guarantee safe and reliable delivery worldwide.
RE14016 Crossed Roller Bearing – FAQ
What should I do if the bearing produces noise during operation?
+
-
Unusual noise often indicates insufficient lubrication, contamination, or excessive preload. Clean the bearing area, reapply the proper lubricant, and ensure correct installation torque to restore smooth performance.
What happens if the bearing clearance changes after installation?
+
-
This may result from improper fitting tolerances or uneven mounting surfaces. Recheck the housing and shaft dimensions and ensure uniform tightening of fixing bolts to avoid deformation.
Can I replace only one ring if damage occurs?
+
-
No. The inner and outer rings are precision-matched at the factory. Replacing a single component can lead to reduced accuracy and early wear. Always replace the bearing as a complete unit.
Why is rotational resistance higher after installation?
+
-
A slight increase in resistance is normal due to preload and seal friction. However, excessive resistance indicates over-tightening or misalignment-recheck mounting conditions and preload settings.
How to handle the bearing before installation?
+
-
Do not remove the bearing from its protective wrapping until just before assembly. Handle with clean gloves and avoid any contact with moisture or dust to preserve precision.
Hot Tags: re14016 crossed roller bearing, China, manufacturers, factory, customized, for sale, CRB crossed bearing, CRBC Crossed Roller Bearing CRBC 8016, RB crossed roller bearing RB14025, RB crossed roller bearing RB9016, RE Crossed Roller Bearing RE 60040, SX crossed roller bearing SX011880