Product Overview
- The bearing uses alternating orthogonal rollers to manage radial, axial, and moment loads simultaneously.
- This configuration delivers a steady rotation feel with minimal frictional fluctuation, allowing long-term repeatability in demanding positioning environments.
Notable Advantages
- Slim profile with high rigidity
- Designed for installations where envelope size must remain minimal without sacrificing stiffness.
- Stable rotation torque
- Optimized roller alignment reduces micro-vibration and improves accuracy retention.
- Flexible customization
- Clearance, preload, coatings, and lubrication can be tailored for specific motion systems.
Key Technical Parameters – RE8016
| Inner Diameter (d) | 80 mm |
| Outer Diameter (D) | 120 mm |
| Roller Pitch Diameter (Dpw) | 101.4 mm |
| Width (B) | 16 mm |
| Chamfer (rmin) | 0.6 |
| Shoulder Size (ds) | 91 |
| Shoulder Size (Dh) | 111 |
| Basic Load Rating (Radial) Cr | 30.1 kN |
| Basic Load Rating (Radial) Cor | 42.1 kN |
| weight | 0.7 kg |
| Precision Grades | P5 / P4 / P2 |
Check More Type of RB Crossed Roller Bearing
RE8016 Crossed Roller Bearing – FAQ
How can I reduce wear when the RE8016 runs under frequent start-stop cycles?
Start-stop applications benefit from higher-grade lubrication and light preload. Excessive preload increases contact stress on the rollers. Using a specialized low-friction grease and maintaining clean operating conditions significantly slows wear.
How do installation errors affect the precision of the RE8016?
Even slight mounting skew can alter roller contact angles, reducing precision. This may show up as fluctuating torque, uneven load sharing, or drifting accuracy in positioning systems. A precision-machined seat and controlled tightening force are essential.
What should I do if clearance becomes larger after long-term use?
Increasing clearance is generally caused by progressive wear or insufficient lubrication. A scheduled lubrication interval and periodic torque checks help detect changes early. If clearance growth is significant, replacement is recommended to maintain accuracy.
How can I confirm that preload is set correctly on the RE8016?
Correct preload should produce consistent, smooth rotation without spikes in torque. If torque feels sticky or sharply increases after certain angular positions, preload is likely excessive or uneven due to installation distorti
Hot Tags: re8016 crossed roller bearing, China, manufacturers, factory, customized, for sale, CRB crossed roller bearing CRB 14025, RB crossed roller bearing RB7013, RE Crossed Roller Bearing RE6013, SX crossed roller bearing SX011836, XSU crossed roller bearing XSU080258, XU crossed roller bearing XU120179