Bearings for Backup Rolls
Backup roll bearing 12DC14110 and 18DC26125 are two types of cylindrical roller bearings with thick-walled outer ring, used for KT 12-high mill. 12DC14110 is three row cylindrical roller bearing with 2 brass cages.
The test video of back-up roll bearing 12DC14110:
Bearing type: Three row cylindrical roller bearing with thick-walled outer ring
Application: Back-up Roll bearing for KT Mill, 12-high
Type code: 12DC14110
Sorting: 5 piece / set
Rotation Speed: Outer ring Max. 1820 r/min
Radial Load: 128.5 kN
Lubrication: Forced Circulating Lubricated
Accuracy: radial runout of inner ring ≤0.008, radial runout of outer ring ≤0.004
Cylindrical roller: with logarithimic profiling
Outer Diameter: 140mm
Inner Diameter: 60mm
Height: 110mm
Seals: without seals, without retaining ring
Hardness of outer ring: HRC 58-60
Hardness of inner ring: HRC 61-66
Hardness of Roller: HRC 60-65
Cage: Brass cage
Note: The variation between two bearing next to each other on the shaft should not exceed 0.002. The variation of bearing section heights should not exceed 0.005 on the shaft.
Tedin’s Advantages:
1. Self-developed roller production line:
Roller generatrix is modified by the logarithmic curve.
Reduce the stress concentration at the edge of the roller.
Increase bearing service life.
Precise control of roller roundness and contour.
Roller accuracy can reach to Grade 1.
Group diameter variation: 0.001mm;
Outer diameter waviness: 0.00015;
Contour deviation: 0.0015mm;
Hardness: HRC 61-64;
2.Bearing outer ring with double ribs: Effectively withstand axial force.
3. With special design of cage structure.
4. High purity raw material: imported row material TIMKEN steel, OVAKO steel, BAOSHAN special steel, etc.
Hot Tags: Bearings for Backup Rolls, China, manufacturers, factory, customized, for sale, Bearing Components