Crusher bearings run the inner ring of the specific reasons and detailed solutions
Crusher is a commonly used mining crushing equipment, in the production process, bearing running inner ring damage is a common failure. The damage of bearing inner ring will affect the working efficiency and service life of the crusher, so it needs to be repaired and replaced in time.
There are many reasons for bearing damage, such as bearing failure, insufficient lubrication, overload and so on. The most important reason is bearing failure, in which the ball or roller inside the bearing is damaged, resulting in the inner ring of the bearing being broken or worn out, which ultimately leads to bearing failure.
In addition, insufficient lubrication is also one of the reasons for the damage of the inner ring of the bearing run, lack of lubrication will lead to increased wear of the internal parts of the bearing bearings, the inner ring of the bearing run will be subjected to greater pressure in the work, resulting in cracks and wear. Overload will also make the bearing run inner ring is subjected to excessive pressure, resulting in damage.
For the solution to the damage of the inner ring of the bearing, first of all, we need to check and replace the bearing in time. When replacing the bearings, good quality and stable performance bearings should be selected to avoid the occurrence of bearing failure due to poor quality bearings. Secondly, during the operation of the bearings, the bearings should be oiled and lubricated in time, and attention should be paid to checking whether there is any foreign matter around the bearings to ensure the normal use of the bearings. In addition, in the work of the equipment, pay attention to control the load, to avoid overloading the bearing run inner ring damage.
In conclusion, bearing damage is one of the common failures in the use of crusher, but as long as attention is paid to inspection and maintenance, timely replacement of damaged bearings, and strict control of the operating load, it can effectively avoid the occurrence of bearing damage and improve the working efficiency and service life of the crusher.