Forklift bearing is a very important hardware parts applied in forklift, forklift bearing plays an irreplaceable role in the work of forklift.The forklift bearings are different from the general common bearings, which are better than the general bearings in terms of doing over, bearing materials and performance.Industrial handling vehicles are widely used in ports, stations, airports, freight yards, factory workshops, warehouses, distribution centers and distribution centers, and can enter the ship's hold, carriage and container for pallet cargo loading and unloading, handling operations.
Forklift bearings are essential equipment for pallet transportation and container transportation. Forklift plays a very important role in the logistics system of enterprises, and is the main force in material handling equipment.Widely used in stations, ports, airports, factories, warehouses and other sectors of the national economy, they are efficient equipment for mechanized loading and unloading, stacking and short-distance transportation.
Caution.

1. Keep the forklift bearings and its surrounding environment clean
Even if the smiling dust invisible to the naked eye enters the forklift bearings, it increases the wear, vibration and noise of the bearings.
2. the use of installation should be carefully
Powerful stamping is not allowed, direct hammering of forklift bearings is not allowed, and pressure transmission through rolling bodies is not allowed.
3.the use of appropriate and accurate installation tools
Try to use special tools and strongly avoid using things like cloth and short fibers.
4. to prevent the rust of forklift bearings
When picking up the forklift bearings directly by hand, wash off the sweat on your hands fully and apply high quality mineral oil before operation, especially pay attention to rust prevention in rainy season and summer.
However, under certain specific operating conditions, forklift bearings can achieve longer life than conventionally calculated, especially under light loads.These special operating conditions are when the rolling surfaces (tracks and rolling elements) are effectively separated by a lubricant film and limit the surface damage that can be caused by contaminants.